[ Feature ] ◎ The new nano formula mortar is widely used to fill various holes and gaps in walls and floors. ◎ There is no need for complicated double-drug mixing or adding solvent stirring procedures, it forms a strong sealing and blocking effect after drying, and has a high waterproof ability. ◎ It is suitable for indoor or outdoor use, and it can be applied even in continuous rainy days without waiting for the walls to dry completely. ◎ It is specially used to fill up the concave holes on the wall. It is different from the traditional mortar. It can provide elasticity without cracking, excellent waterproof performance, strong adhesion to smooth surfaces, fast drying, and can withstand the erosion of acid and alkali solvents.

[ Demo video ]

[ Introduction ] It is specially used to fill up the hollows on the wall, which is different from the general traditional mortar. It can provide no cracking elasticity, excellent waterproof ability, strong adhesion to smooth surfaces, fast drying, and can withstand the erosion of acid and alkali solvents. [How to use] Clean the wall surface to be treated, scrape off the loose paint film with a scraper and remove the dust with a wet rag, especially the dirt, dust, sand, oil stains or mildew, etc., please clean it thoroughly first. It will precipitate after a long time, please stir well before use. [ It is recommended to distinguish the timing of use according to the characteristics of the raw materials ] 1. The elasticity of "High Adhesion Mortar" is not as great as that of "Flexible Waterproof Putty". If considerable elasticity is required to prevent cracking, it is better to use "Flexible Waterproof Putty"; 2. There are obvious particles on the surface of "High Adhesion Mortar" after hardening. Although it has anti-slip effect, if you want to smooth the wall surface, you still need to apply general filling soil after "High Adhesion Mortar" is dry; 3. "High Adhesion Mortar" contains a lot of water, so the drying speed is relatively slow. If the hole is on the roof, pay attention to whether it will be painted too much (the hole is too big), and it will fall off because it is not dry, but "Flexible Waterproof Putty" is relatively dry, just apply Relatively no trouble of falling; 4. For the potholes on the wall that were originally nailed or drilled, it is recommended to use "High Adhesion Mortar" to fill them up, because "Flexible Waterproof Putty" is soft, and if nails are nailed to the wall at the same position in the future, they may not be nailed; 5. Compared with the stickiness of surface adhesion, "Flexible Waterproof Putty" is much stickier than "High Adhesion Mortar", and its waterproof performance is equivalent; 6. Since the particles of "High Adhesion Mortar" are relatively thick, the long thin seams can still be stuffed in with "Flexible Waterproof Putty"; 7. Based on the premise of cost considerations, when the pothole is too large, it is more economical to use "High Adhesion Mortar"; 8. Regardless of whether "High Adhesion Mortar" or "Flexible Waterproof Putty" is used to fill gaps and holes, wait until it is completely dry (one to three days, depending on the weather) before performing general filling and smoothing and applying "Silver Ions Emulsion Paint" for decoration. [ Main ingredients ] Ion water, water-based resin, sand, special additives, free of harmful ingredients such as heavy metals, formaldehyde, and benzene-based volatiles. [ Precautions ] After opening, please use up as soon as possible. If not used up, please seal the outer package tightly and put it in a cool and dry place to prevent it from drying up. Do not let children eat it by mistake. In case of emergency, please rinse with plenty of water.

[ Note ] If it is not used up after use, keep it for the next use. Please be sure to seal the plastic bag tightly before storage to prevent blockage. If you have any questions about operation, please call us at 0800-881990.