[ Feature ] ◎ The new nano formula fills the soil with excellent adhesion and is widely used to fill various wall gaps. ◎ After drying, it forms a strong sealing and blocking effect, and has a certain degree of elasticity. It will not cause cracking after a slight earthquake, and it has a high waterproof ability. ◎ Water-based, environmentally friendly and non-toxic formula, easy and convenient to apply and finish, and will not cause secondary damage to the environment.

[ Demo video ]

[ Introduction ] This series of products is divided into two types: "Without stone powder" and "With stone powder". The main components of waterproof resin are the same, and "Without stone powder" is usually used for large-area surface smoothing, which is smooth and easy to smooth. "With stone powder" is recommended for applications such as window frames, door cracks, tile cracks, and wall cracks. The "300g rubber tube packaging" and "Home Patching Experience Pack" are all "With stone powder". This series of products is specially used to fill the cracks or holes in walls, window frames and door frames. It is different from ordinary cheap filling soil that is not waterproof and has poor adhesion. It can provide elasticity that is not easy to crack, excellent waterproof ability, Strong adhesion to smooth surfaces, fast drying, and resistant to acid and alkali solvents. [ How to use ] Clean the wall surface to be treated, scrape off the loose paint film with a scraper and remove the dust with a wet rag, especially the dirt, dust, sand, oil stains or mildew, etc., please clean thoroughly first, then use a scraper or directly apply by hand and squeeze into crevices or potholes. [It is recommended to distinguish the timing of use according to the characteristics of the raw materials] 1. If considerable elasticity is required to prevent cracking, it is better to use "Flexible Waterproof Putty"; 2. "High Adhesion Mortar" contains a lot of water, so the drying speed is relatively slow. If the hole is on the roof, pay attention to whether it will be painted too much (the hole is too big), and it will fall off because it is not dry, but "Flexible Waterproof Putty" is relatively dry, just apply Relatively no trouble of falling; 3. For the potholes on the wall that were originally nailed or drilled, it is recommended to use "High Adhesion Mortar" to fill them up, because "Flexible Waterproof Putty" is soft, and if nails are nailed to the wall at the same position in the future, they may not be nailed; 4. Since the particles of "High Adhesion Mortar" are relatively thick, the long thin seams can still be stuffed in with "Flexible Waterproof Putty"; 5. Regardless of whether "High Adhesion Mortar" or "Flexible Waterproof Putty" is used to fill gaps and holes, wait until it is completely dry (one to three days, depending on the weather) before performing general filling and smoothing and applying "Silver Ions Emulsion Paint" for decoration. [ Main ingredients ] Ion water, water-based resin, stone powder, special additives, free of harmful ingredients such as heavy metals, formaldehyde, and benzene-based volatiles. [ Precautions ] After opening, please use up as soon as possible. If not used up, please seal the outer package tightly and put it in a cool and dry place to prevent it from drying up. Do not let children eat it by mistake. In case of emergency, please rinse with plenty of water.

[ Note ] If it is not used up after use, keep it for the next use. Please be sure to seal the plastic bag tightly before storage to prevent blockage. If you have any questions about operation, please call us at 0800-881990.