[ Feature ] ◎ Specially designed for roof leakage and pool landscaping leakage. ◎ There is no need to calculate the mixing ratio, it can be applied directly after mixing. ◎ The drying speed is extremely fast, you can touch it the next day, and you can step on it after 72 hours. ◎ Suitable for indoor or outdoor use, Provide a five-year warranty from the original factory (construction must be carried out according to the following steps).

[ Introduction ] [ White ] It is specially designed for water leakage on the roof floor and water leakage in the parapet gap, and it needs to withstand long-term erosion such as ultraviolet rays, earthquakes, sun and rain. [ White-Experience set ] About 1 square meter can be coated: [ White-Rookie set ] About 5 square meter can be coated: [ White-Mini set ] About 10 square meter can be coated: [ White-Standard set ] About 20 square meters can be coated: [ Colorless ] Specifically for pools, fish ponds, fountain landscaping and other leakages, but still need to maintain the original color of stone landscaping, and need to withstand water pressure, earthquake , the challenge of thermal expansion and contraction caused by the sun and rain. [ Colorless-Experience set ] About 0.7 square meter can be coated: [ Colorless-Rookie set ] About 3.5 square meter can be coated: [ Colorless-Mini set ] About 7 square meter can be coated: [ Colorless-Standard set ] About 20 square meter can be coated:

[ Applications ]

[ Demo video ]

[ How to use ] 1. All drainage holes, power switch sockets, etc. must first use "Masking tape” to properly shade to avoid obstruction; 2. For the old damaged or peeling waterproof coating, fallen leaves, moss, mud, sand, gravel and other foreign matter, it should be completely scraped and cleaned, and kept dry, without residual moisture or standing water; 3. If there are damaged potholes on the ground or wall after cleaning, first use "High Adhesion Mortar" Fill it up, wait until it dries and hardens before continuing "Step 5-1"; 4. If there are cracks in the cement joints between the pool stones, first use "Flexible Waterproof Putty"Fill the cracks, and wait until it dries and hardens before continuing "Step 5-1"; 5. There are a total of three raw materials "ABC" in the package, which are "A: Main agent", "B: Hardener", “C: Sand”, and accessories;   5-1. Pour "B: Hardener" into "A: Main agent" and stir well, be sure to finish coating within 45 minutes, otherwise it will start to harden;   5-2. If it is used on the ground, pour all "C: Sand" into "A: Main agent" together stir well to prevent slipping;   5-3. If it is used on the wall or ceiling, please do not to add “C: Sand”: vertical surfaces and ceilings do not need anti-slip;   5-4. If coating wall, ceiling and floor at the same time, don’t add sand first, in "Step 5-1" then paint vertical and ceiling first;   5-5. When starting to coat the ground, please start from the farthest point in case you can't get out;   5-6. The recommended thickness is about 「0.5mm~1mm」, too thin (such as: Plastic wrap) may not be strong enough, too thick (such as: Mouse mat) is not good enough, and the “C: Sand” on the ground will settle down, resulting in no sand marks on the surface, and it will be easy to slip when walking on it after drying;   5-7. It is recommended to prepare another cup so that the ingredients in the bucket can be scooped out for use. "Bubble tea" cups are a good choice, so don’t spend extra money to buy them; 6. Smoking is strictly prohibited during the construction process and attention should be paid to the shielding and protection of power switch lines and other facilities. If necessary, please prepare fire-fighting equipment in advance; 7. The paint that has been stirred will start to harden rapidly. After about 45 minutes, it can hardly be stirred, and it cannot be stored until the next use. After brushing, or add 10%~15% "Lacquer thinner" (you can buy it in hardware stores) to dilute it before starting to mix, which can slightly prolong the hardening time; 8.The capacity of this product is guaranteed to be sufficient. If you feel that the raw materials are insufficient or too much, please check whether there is too much or not enough. [Precautions] It is not recommended to apply on rainy days. After raining, it must be cleared for at least three days. After confirming that the ground is dry, it can be applied. And it will not rain for at least three days after application. For details, please refer to Weather Forecast。

[ Main ingredients ] Epichlorohydrin Resin（A: Main agent）、Bisphenol A Resin（B: Hardener）、Sand（C: Sand）, does not contain heavy metals, preservatives and other harmful ingredients.

[ Note ] The capacity of this product has been calculated through repeated experiments by experts to ensure that it is sufficient. If you feel that the raw materials are insufficient or too much during operation, please check immediately whether there is too much coating or not thick enough. If you have any questions about operation, please call us at 0800-881990.